How to Run YouTube Ads: Ad Formats, Pricing, a Budget Example and Step-by-Step Setup
How do you advertise on YouTube? Current ad formats, paying by CPV and CPM, a worked budget example, step-by-step Google Ads setup and conversion measurement.
TL;DR — Summary
- YouTube ads are bought in Google Ads, not YouTube Studio. You need a Google Ads account, the video uploaded to YouTube as public or unlisted, and the channel linked to Google Ads.
- Current formats: skippable in-stream (skippable after 5 seconds), non-skippable in-stream (15-60 sec), bumper (up to 6 sec), in-feed, Shorts and Masthead. The old overlay ads no longer exist.
- Billing depends on format: on skippable ads you pay when the viewer watches 30 seconds (or the whole ad if shorter) or interacts (CPV); on bumper and non-skippable ads you pay per thousand impressions (CPM).
- Example: a $1,000 budget at an average $0.05 cost per view buys about 20,000 views. For sales and leads, Google recommends a Demand Gen daily budget of at least 20 times your expected CPA; Demand Gen replaced video action campaigns.
How do you advertise on YouTube? (Short answer)
YouTube ads run through Google Ads. You upload your ad video to your YouTube channel as public or unlisted, link the channel to your Google Ads account, then create a Video campaign (for awareness and consideration) or a Demand Gen campaign (for sales, leads and traffic) in Google Ads, choosing budget, targeting and the video. Once the ad passes review, it goes live.
Let's clear up a common confusion first: the monetization and ad-type options in YouTube Studio are for creators who want other brands' ads shown on their own videos. To advertise your own product, you go to Google Ads, not that menu. Some guides mix up the two.
This guide covers the current ad formats and how they are billed, the right campaign type for your goal, budget math, step-by-step setup in Google Ads, and how to measure whether the campaign works.
What do you need to run YouTube ads?
Having these four things ready cuts setup to about half an hour:
- A Google Ads account with billing set up and the right currency (currency can't be changed after the account is created)
- A YouTube channel and ad video: the video must be public or unlisted; private videos can't be used in ads
- Channel link: link your YouTube channel to Google Ads so you can remarket to viewers and see channel metrics
- Landing page and measurement: if you want sales or leads, a Google Ads conversion tag or conversions imported from GA4, auto-tagging and, where needed, UTM parameters
What are the YouTube ad formats? (2026 list)
According to the current Google Ads Help list, YouTube has six main video ad formats. The format determines both where and how the ad shows and what you pay for:
Overlay ads and the 'TrueView Discovery' name that still appear in some guides are outdated. Today's equivalent is in-feed ads.
- Skippable in-stream: plays before, during or after a video; viewers can skip after 5 seconds. With CPV bidding you pay when the viewer watches 30 seconds (or the full ad if shorter) or interacts. No length limit; Google recommends under 3 minutes.
- Non-skippable in-stream: can't be skipped and runs 15 to 60 seconds depending on campaign subtype. Billed per impression with target CPM.
- Bumper: a non-skippable ad of up to 6 seconds, used for reminders and reach, billed by CPM.
- In-feed: appears with a thumbnail and text in YouTube search results, Watch Next and the home feed. You pay when someone clicks to watch.
- Shorts ads: appear between videos in the Shorts feed; users can swipe past immediately. A view counts at 10 seconds watched, a full watch, or a click on the CTA, like, comment or share. Needs a vertical (9:16) video.
- Masthead: the large unit at the top of the YouTube home feed. Reservation only, bought through Google sales; usually not suitable for small and mid-size budgets.
Which campaign type should you choose? Choosing by goal
In Google Ads you start a campaign with a goal, and the goal determines which campaign types are available. For YouTube there are two routes:
An important change: the conversion-focused 'Video action campaigns' moved to Demand Gen. Google stopped new video action campaign creation in April 2025 and moved the last campaigns to Demand Gen in April 2026. So if you want sales or leads from YouTube today, you build a Demand Gen campaign, which also uses Discover and Gmail inventory alongside YouTube.
- Awareness and consideration → Video campaign: video views (skippable, in-feed and Shorts for views and channel engagement), video reach (a mix of bumper, skippable and non-skippable to reach the most unique people), target frequency and ad sequence subtypes
- Sales, leads or website traffic → Demand Gen: conversion-based bidding with video and image assets (maximize conversions, target CPA, target ROAS)
- Ecommerce sites with a product feed can also reach YouTube through Performance Max, but YouTube-specific control and reporting are more limited
- Rule of thumb: for a new brand or product, build an audience with views and reach first, then target that audience and site visitors with a Demand Gen conversion offer
How is YouTube ad pricing set? Budget example
YouTube has no fixed ad price; prices are set by auction, and your audience, country, season, competition and how engaging your ad is all change cost. So 'how much does a view cost' has no single answer. The right approach is to work the budget backwards from your goal and correct it with the actual costs of the first 1-2 weeks.
Views goal (illustrative numbers): with a $1,000 budget and an average cost per view (CPV) of $0.05, you get about 20,000 views. At a 25% view rate, that takes about 80,000 impressions. Formula: views = budget ÷ CPV.
Reach goal (illustrative numbers): with a $1,000 budget and a $5 CPM, you get 200,000 impressions. At an average frequency of 2.5, that reaches about 80,000 unique people. Formula: impressions = budget ÷ CPM × 1,000; unique reach ≈ impressions ÷ frequency.
Sales and leads goal (Demand Gen): Google recommends a daily budget of at least 20 times your expected cost per acquisition (CPA). With an expected CPA of $40, that's at least $800 a day. Google also recommends running for at least 4-6 weeks, allowing about 2 weeks of learning before major changes, and changing bids no more than 15% once a week. If that budget is too high, start with cheaper goals (views, remarketing) or prioritize search campaigns.
- $1,000 ÷ $0.05 CPV → ~20,000 views
- $1,000 ÷ $5 CPM × 1,000 → 200,000 impressions → ~80,000 people at frequency 2.5
- Expected CPA $40 × 20 → Demand Gen daily budget ≥ $800
- Check the monthly budget with the Ad Budget Calculator and your profitable CPA ceiling with the ROAS Calculator
How do you set up a YouTube ad in Google Ads step by step?
The steps below are for an awareness Video campaign; Demand Gen setup follows a similar flow with different goal and bidding options. Interface labels change from time to time, but the order stays the same:
- 1. Upload the video to YouTube as public or unlisted and copy the link
- 2. In Google Ads, go to Campaigns › New campaign, choose the goal (awareness and consideration, or sales/leads) and pick Video (or Demand Gen) as the campaign type
- 3. Choose the subtype: views, reach, target frequency or ad sequence
- 4. Enter the budget (daily or campaign total) and start-end dates; the bid strategy follows from the subtype (e.g. target CPV, target CPM)
- 5. Set location, language and inventory type; exclude content categories that are sensitive for your brand
- 6. Set targeting: demographics, audiences (interests, in-market, your customer list, channel and site visitors) and, if needed, topics, keywords and placements. Over-narrow targeting limits delivery and learning
- 7. Create the ad: paste the video link, add the final URL (with UTMs if needed), call to action and headline; add a vertical version for Shorts
- 8. Publish; ads go through policy review (Google says most ads are reviewed within one business day)
What makes a good YouTube ad video?
On skippable ads, the first 5 seconds are everything: viewers must understand what it is and why to keep watching before they can skip. With CPV bidding you don't pay for skipped ads, but your message doesn't land either. Google's guidance for effective video ads comes down to four things: grab attention, show the brand early and clearly, connect with the viewer emotionally or practically, and tell them clearly what to do.
- Show the product, problem or outcome in the first 5 seconds; don't open with a long logo animation
- Put the brand name and product on screen in the first seconds so even people who skip know whose ad it was
- Many mobile viewers watch with sound off; use captions and on-screen text
- Prepare a vertical (9:16) version for Shorts and mobile, and horizontal (16:9) for in-stream
- End with one clear call to action; the landing page should match the video's promise in the same words
- Don't show the same video to the same audience for months; watch frequency and refresh creative
How do you measure YouTube ads? Which metrics matter?
Judging a video campaign only on last click, like a search campaign, is misleading: many people who watch don't click the ad but search for you later. Track these metrics depending on your goal:
Engaged-view conversions: counted when a user watches at least 10 seconds of a skippable ad (or all of it if shorter), or 5 seconds of an in-feed or Shorts ad, and later converts without clicking. The default window for web conversions is 3 days and can be changed in the conversion action settings. Report these separately from click conversions; read both together but separately when making decisions.
As an extra check, watch branded searches (Search Console and search campaign data) and direct traffic during the campaign. Accounts with meaningful spend can use Google's Brand Lift study, which surveys people who saw the ad against those who didn't.
- View rate = views ÷ impressions × 100: shows whether the opening seconds hold attention
- CPV (cost per view) = cost ÷ views; CPM = cost ÷ impressions × 1,000
- Video played to 25%, 50%, 75%, 100%: shows where the video loses viewers
- Unique reach and average frequency: the real success measure for reach campaigns
- CTR, conversions and CPA/ROAS: the decision metrics for Demand Gen and sales goals
Who are YouTube ads right for, and who not?
YouTube is strong when you need to show a product, explain how it works or create demand in a new category: visually explained products, apps, education and services, new brands. If demand already exists and people search for the product on Google, starting with search campaigns usually pays back faster on a limited budget.
For a business with a small budget, no measurement set up and no good video, spending on YouTube is often premature. Set up conversion tracking first, find a profitable CPA with search and remarketing, then grow the top of the funnel with YouTube.
Frequently Asked Questions
Do YouTube ads cost money, and what is the minimum budget?
When do you pay for a YouTube ad?
Do you need a YouTube channel to run ads?
How long should a YouTube ad be?
Can you still use video action campaigns?
Resources & Related Reading
- How to Run TikTok Ads: Budget and Measurement
- Ad Budget Calculator
- ROAS Calculator
- UTM Builder
- Conversion Rate Calculator
- What Is Google Ads and How Does It Work?
- How to Run Google Ads: Your First Campaign
- How to Run Instagram Ads
- What Is CTR? What Is a Good Click-Through Rate?
- How to Set an Advertising Budget
- Google Ads Help: About video ad formats ↗
- Google Ads Help: Video action campaigns upgrading to Demand Gen ↗
- Google Ads Help: About engaged-view conversions ↗
- Google Ads Help: About Video campaigns ↗
Digital marketing specialist building websites, performance ad programs and B2B lead generation systems for B2B and e-commerce brands.
Connect on LinkedIn ↗Last updated: